How you can Get a Mercury Vehicle Code

You can get the vehicle codes from your Mercury working with an OBD I or II scan tool. This instrument could be identified at any car parts retailer. If the Mercury is from 1996 or later on, you require an OBD II scan instrument; earlier model Mercury autos will need an OBD I scan instrument. When you see a warning or support light illuminate in your instrument panel, this can be an indication that a trouble code continues to be sent towards the Mercury's On-Board Diagnostics laptop or computer. Never ignore the lights otherwise you could possibility even more harm to your automobile. This device can also be used to reset the computer and flip off the support and warning lights soon after you have got retrieved the codes and produced the repairs. Other people Are Studying How you can Retrieve an OBD2 Code Without a Scan Gauge How to Verify Fault Codes on a Mercury Sable Issues You'll need OBD I scan device Ignition critical Pencil and paper OBD I scan device booklet Demonstrate Far more Directions 1

Locate the OBD port under the steering column to your left with the fuse panel cover. Plug the OBD I scan device into this port in your Mercury. Will not force the OBD cable in to the port or you could injury the pins.

2

Put the important thing to the ignition and turn it towards the "Acc" position.

3

Wait for your scan device to retrieve information through the personal computer and then display "Ok" for the face on the scan device. When it does this, flip off the ignition and unplug the scan instrument.

4

Find the menu to the scan tool and scroll by it to locate the "Stored Engine Codes" options. Select this option and write down the codes Look up these codes within the scan tool's booklet.