How you can Receive a Mercury Motor vehicle Code

You can get the vehicle codes from your Mercury applying an OBD I or II scan instrument. This instrument may be discovered at any car elements retailer. In case the Mercury is from 1996 or later, you require an OBD II scan tool; earlier model Mercury cars want an OBD I scan tool. Any time you see a warning or services light illuminate in your instrument panel, this really is an indication that a difficulties code has been sent to your Mercury's On-Board Diagnostics computer system. Don't disregard the lights or you could chance even more injury to your vehicle. This tool is also applied to reset the personal computer and turn off the service and warning lights after you might have retrieved the codes and made the repairs. Others Are Reading through The way to Retrieve an OBD2 Code With no Scan Gauge How you can Check Fault Codes on the Mercury Sable Matters You'll need OBD I scan device Ignition crucial Pencil and paper OBD I scan device booklet Display A lot more Guidelines 1

Locate the OBD port beneath the steering column towards the left on the fuse panel cover. Plug the OBD I scan instrument into this port in your Mercury. Do not force the OBD cable to the port otherwise you could harm the pins.

2

Put the key to the ignition and flip it to the "Acc" position.

3

Wait to the scan tool to retrieve information through the laptop or computer and then show "Ok" for the face of the scan tool. When it does this, flip off the ignition and unplug the scan device.

4

Find the menu about the scan instrument and scroll by way of it to locate the "Stored Engine Codes" options. Select this option and write down the codes Look up these codes within the scan tool's booklet.