The services engine light will turn on at frequent intervals when your automobile needs regimen upkeep. Just after the maintenance is finished you are likely to need to manually reset the light to flip it off. This can be an easy adjustment that will only get a handful of moments. Others Are Reading through How you can Reset the "Service Engine Soon" inside a Chevy The best way to Reset a Chevy S10 Computer Things You'll Demand OBD II scanner tool Ignition key Show More Instructions 1
Look for the OBD II port located near the emergency brake on the lower dashboard. The OBD II port will be the receptive end for the connector on the OBD II scanner tool. Examine the connector end of the tool and the receptive port to make sure you have the correct port. Plug the OBD II scanner tool into the port.
2
Close the doors, roll up the windows and turn on the OBD II scanner tool. Put the key into the ignition and turn it to "on," but consider care not to start the engine. Turning the automobile on will start the electrical system which will power the OBD II scanner tool and allow it to do its job. The engine needs to remain off for the scanner to work.
3
Wait for the screen on the scanner to stop flashing. The support engine light will have turned off. Turn the key in the ignition to "off" and unplug the scanner.
4
Restart the engine and verify that the service engine light is still off on the instrument panel. Turn off the car.
No comments:
Post a Comment